About Alfie Skeet

This author has not yet filled in any details.
So far Alfie Skeet has created 27 blog entries.
19 04, 2021

Robotics Engineer (Apprentice)

2021-04-19T15:55:39+00:00

Department: Engineering Reporting to: Engineering Manager Purpose of the Role: Maintenance and Project Manager We are looking for a bright individual with the will to work hard, learn and train towards becoming an engineer with experience in the whole lifecycle of a robot cell from conception through design and commissioning. [...]

Robotics Engineer (Apprentice)2021-04-19T15:55:39+00:00
19 04, 2021

Production Operative – Alocrom/Surtec

2021-04-19T13:16:59+00:00

Key Objectives/Primary Job Purpose: To assist in the provision of Alocrom/Surtec/chemical testing procedures within the Microwave Department. Key Areas of Responsibility: Lapping, degreasing, pre-application cleaning Application of chromate/surtec Inspection of product Stripping of Alocrom/Surtec, blasting Solution analysis and analysis review PH Meter calibration Chemical bath changes/treatments Adhesive tape test Working [...]

Production Operative – Alocrom/Surtec2021-04-19T13:16:59+00:00
12 04, 2021

Process/Development Engineer – Foundry

2021-04-19T12:45:37+00:00

Job Title: Process/Development Engineer - Foundry Department: Operations Reporting to: Maintenance and Project Manager Purpose of the Role: Reporting to the Maintenance and Project Manager, the Process/Development Engineer will be responsible for supporting production and engineering requirements, assisting in current ongoing improvements, identifying and driving new process improvements. Key Areas [...]

Process/Development Engineer – Foundry2021-04-19T12:45:37+00:00
9 04, 2021

RF/Microwave Engineer – Graduate Role

2021-04-19T12:45:20+00:00

Department: Engineering Reporting to: Engineering Manager Purpose of the Role: The role is Graduate - Microwave Engineer who will follow a tailored training plan that dependant on experience and knowledge with a view to attaining a competency level which will allow the fulfilment of following: Key Areas of Responsibility: Report [...]

RF/Microwave Engineer – Graduate Role2021-04-19T12:45:20+00:00
9 04, 2021

RF/Microwave Engineer

2021-04-19T12:44:48+00:00

Department: Engineering Reporting to: Engineering Manager Purpose of the Role: As a RF Microwave Engineer, your design work fully captures the requirements of the customer (with any exceptions being documented) whilst also ensuring that manufacturing information allows the device to be efficiently and effectively realised. Key Areas of Responsibility: Report [...]

RF/Microwave Engineer2021-04-19T12:44:48+00:00
25 03, 2021

£700K of funded support to drive Sylatech’s transformational business growth

2021-03-30T10:02:57+00:00

Sylatech, an engineering business based in Kirkbymoorside, has achieved success by being formally accepted as a beneficiary on to the leading aerospace transformation programme, Sharing in Growth. The scheme will provide Sylatech with an intense and comprehensive programme of training, coaching and development, tailored to its specific needs, [...]

£700K of funded support to drive Sylatech’s transformational business growth2021-03-30T10:02:57+00:00
2 03, 2021

Paint Room (Apprentice)

2021-03-02T12:52:59+00:00

Operating from the heart of the North Yorkshire Moors in Kirkbymoorside, Sylatech has a global customer base across multiple business sectors including Aerospace, Space, Defence, Medical, Automotive and Construction. As a trusted partner for delivering high quality systems and components to exacting standards, Sylatech often partners on programmes with international [...]

Paint Room (Apprentice)2021-03-02T12:52:59+00:00
20 01, 2021

PAPI Grant Support for Sylatech’s Latest Capital Investment

2021-01-20T14:18:57+00:00

Thanks to the help of grant funding via the Product and Process Innovation (PAPI) scheme, delivered by the University of York, we are delighted to announce our investment in the purchase of a large-bed Mitutoyo CMM (co-ordinate measuring machine). This investment is enables a product [...]

PAPI Grant Support for Sylatech’s Latest Capital Investment2021-01-20T14:18:57+00:00
23 11, 2020

Meeting the Prototyping Needs of the Automotive Sector

2020-11-27T16:57:00+00:00

Background When a major UK automotive company approach Sylatech for a solution the pre-production build manufacture of a new electric car component, we were very keen to provide the necessary support. The Challenge The customer’s part was designed for a die-casting process, however with the [...]

Meeting the Prototyping Needs of the Automotive Sector2020-11-27T16:57:00+00:00
13 08, 2020

Sylatech’s MB1 copper alloy kills coronavirus within 10 minutes

2020-08-26T08:24:40+00:00

Working with Sylatech’s MB1 copper-based alloy, a team of scientists at the University of Southampton have established significant results in the elimination of Covid-19 within 10 minutes.  These results demonstrate the alloys ability to reduce coronavirus transmission rates, via commonly touched surfaces, manufactured with this metal. Professor Bill [...]

Sylatech’s MB1 copper alloy kills coronavirus within 10 minutes2020-08-26T08:24:40+00:00