“With the Ultimaker, we can use a 3D printed model for the creation of sample parts directly in our foundry process, without having to invest in tooling to create wax patterns. Through 3D printing we can significantly speed up our sampling process – clients can now get a prototype metal part in just five days!”

— Gordon Gunn, Commercial Director at Sylatech

Sylatech uses 3D printing to produce sample metal prototype parts for its customers, allowing them to test their designs without having to invest in tooling ahead of investment casting. This yields significant time and cost savings as fewer tooling modifications are necessary.

Our investment cast rapid prototyping capability enables the creation of 3-dimensional parts through an additive, layer-by-layer build process. Due to the way the material is added by a precise computer guided applicator, the technique is often referred to as 3D printing.

Working with STL or SLC models we can deliver a physical metal investment cast prototype part to our customers within 5 days. This affords designers and engineers the ability to have actual components to test and validate their design fit.

Our 3D prototyping capabilities, coupled with our investment casting process, delivers high accuracy castings with ultra-fine detail and smooth surface finish. Rapid prototype components can also be CNC machined as required.

Trial Your Parts Today!

Call today to discuss your rapid prototyping requirements and benefit from the expert professional advice of our foundry engineers.
Call now +44 (0) 1751 432 355

Case Study


Traditionally, design engineers would not be able to thoroughly test the functionality of their designs without going down the route of investing in tooling for investment casting. This tooling process typically will take some 3-4 weeks to complete and Sylatech customers typically incur a cost of between £2,000 to £4,000 per tool. About 30% of the tools would require alteration due to customer design modifications. This could cost the customer anywhere between £500 – £900.


With the Ultimaker, Sylatech can offer its customers a cost-effective rapid prototyping solution. Whereas the tooling process would take about 3-4 weeks to complete, a 3D print can be undertaken within a matter of hours. The 3D printing process is popular with Sylatech’s customers due to the flexibility that it affords in the product design lifecycle. Thanks to 3D printing, engineers can now have their designs transformed into a metal part within a number of days.


  • Accelerated placement of tooling orders
  • Reduced level of tooling modifications
  • Flexibility in the product design lifecycle
  • Time and cost savings


By 3D printing prototypes, customers have seen the requirement for tool modifications fall to less than 5%. Customers have an accelerated placement of tooling orders for production and a reduced level of tooling modifications.

Cost comparison

Yacht propeller, 6 components

Traditional tooling approach Ultimaker 3d printing
Project development cost £17,100* £660**
Project development time 4 weeks 5 days

* Creation of 6 tools (£15,000) + two sets of the 6 castings (£600) + tool modification of 3 tools (£1,500)

** 6 Ultimaker prints (£60) + two sets of the 6 castings (£600)

Note: 3D printing can typically avoid the need for undertaking tool modifications i.e. in this case £1,500 could have been saved. Once the customer is ready to produce a production volume, investing in tooling is still necessary.

Rapid Prototype Propeller

Traditionally, it would take 4 weeks of development time to complete a project such as this yacht propeller. If changes in the design required tool modifications, this would come at a cost of around £1,500.

rapid protoype ultimaker 01

With 3D printing, designs can be tested before investing in tooling, which shrinks the percentage of required tool modifications from 30% to below 5%.

Rapid Prototype Proeller

Using 3D printing, Sylatech saw an acceleration in the placement of tooling orders from its clients.

Contact Us Today

Get in touch!

Please contact our Investment Casting team to discuss how we can meet your requirements. +44 (0) 1751 432 355 or via email,
Contact Us Today