Power Dividers & Combiners
Experts
Meeting the customer's complex performance demands
Combiners designs with 2:1, 4:1, 8:1, 16:1, 32:1, 64:1 configurations all use magic tees as the basic building blocks. These have parallel ports which are used as the inputs, and either H or E ports, as the output depending on the mechanical configuration.
Combiners designs with 3:1, 6:1, 12:1, 24:1, 48:1 configurations all use combinations of magic tees and hybrid couplers with fixed waveguide phase shifters to provide internal path corrections.


Tailored to meet your requirements
Waveguide Power Combiners for use with SSPAs allow the outputs from a series of low power solid state amplifiers to be combined into a single higher power. This system replaces a single high-power amplifier, which if subject to a failure would result in zero power at the output.
By replacing the single amplifier with a set of amplifiers the system is still able to operate, albeit at a reduced power level, should one or more of the individual amplifiers fail.
Downloads
Should you require further information, please do not hesitate to telephone us on +44 1751 432 355.